10)SF6 Quality Analysis New
€370
Ein Kurs steht nach der Einschreibung für 365 Tage zur Verfügung
Laufende Zertifizierungen
SF6-Qualitätsanalyse

10)SF6 Quality Analysis New

With the right SF6 measuring devices and their methods, the concentration of parameters such as SF6 volume fraction moisture concentration SO2, HF, H2S, CO, oil mist can be measured in various areas of application (low, m ...
Mehr anzeigen

Inhalt der Kursreihe

  •
    In this third and final part, you will learn more about the measuring devices that can be used for the individual parameters and which parameters can be determined using the test tube measuring device and gas sample bag. The EcoAnalyserSF6 measuring devices can be used to reliably measure the percentage, humidity or SO2 content in the gas mixture as a single measurement. You will also learn how to use our MultiAnalyserSF6 correctly. You will learn about the advantages and correct handling of this combination analyser. At the end of this third part, you will gain an insight into our MirrorAnalyserSF6. This device is particularly suitable for determining the moisture content. Find out how this device works and what the measuring procedure is to ensure precise measurement results.

    • Kursmodul SF6 quality analysis part 3

  • In the second part, you will learn how to correctly interpret the results of the moisture measurement and what partial vapour pressure is all about. In this section, you will also learn about the relevant measurement methods for decomposition products, the procedure and suitable devices. You will then gain an insight into the basics of carrying out a gas measurement and what needs to be observed in order to achieve a correct measurement result. At the end of this second part, you will learn which measuring devices can be used to measure which parameters and what differences the devices have.

  • In Part 1, you will learn why analysing SF6 quality is important and get a general overview of the topic. Familiarise yourself with the current norms and standards for proper quality analysis and learn what is meant by volume percentage and how it affects the operational safety of switchgear. To conclude this first part, you will familiarise yourself with the measurement methods for determining the moisture concentration